The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

How do you read a rim code?

Locate the stamped size on the back of the hub on the rim. This is the assigned measured size of the rim, and it is broken into three sizes: diameter, width and bolt pattern. For example, a 14 by 6 by 4.5 reading on the rim indicates that the diameter of the rim is 14 inches, and it will accommodate most 14-inch tires.

How do I identify my rims?

Inspect the rim of the wheel. The rim is the outer part of the wheel (not the center), and manufacturers like BBS often have their logo molded into the rim for identification. Also inspect the area around the lug holes where the wheel is fastened to the car. Often there will be a logo or company name there as well.

What lug pattern is a Nissan Pathfinder?

Nissan Pathfinder Wheel Size

Can I use 235 tires instead of 225?

Obviously, you will need a certain kind of tire depending on how you use your vehicle. Due to this, a 235 tire might not be better than a 225 tire, or vice versa, but depending on your situation, one tire might serve you better than the other.

Can I use 225 tires instead of 215?

If your vehicle was designed for the 215 width tires, then it will almost certainly be safe to install a 225 with the same aspect ratio and rim size..

What size rims fit my car?

The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

How do you tell the offset of a rim?

Measure the distance from the floor to the straight edge and divide by two. That calculates the centerline of the wheel. If the centerline number is smaller than the hub measurement, offset is positive; if it is larger, offset is negative.

Is 114.3 and 115 the same?

The difference between 115mm and 114.3 is . 7mm. That means using the 114.3 would have each stud off center by . 35 of a millimeter.

How to find custom rims for a Nissan Pathfinder?

Search for 1000’s of Nissan Pathfinder Custom Wheels using our custom search tool for rims and tires. There has never been an easier or more complete wheel search available on any other website. Get started by selecting your vehicle in the search box above.

What are the standard features on a Nissan Pathfinder?

New standard equipment that had previously been part of the Premium Package included 17-inch wheels, a driver-seat memory system, and a leather/woodgrain steering wheel with audio controls. Options included heated front/rear seats and a videotape or DVD rear-seat entertainment system.

When did Nissan stop making the Nissan Pathfinder?

The Japanese market Terrano and high luxury content Terrano Regulus saw demand drop significantly due to the hard economic times felt in Japan, known as the Lost Decade. Nissan offered a smaller, off-road vehicle to its Japanese customer base who enjoyed the Pathfinder when it introduced the Nissan X-Trail in 2000.

What kind of suspension does a Nissan Pathfinder have?

While the Pathfinder/Terrano was essentially based on the newly introduced Hardbody truck, the rear five link coil suspension was borrowed from the Safari to enhance its off-road abilities. The two door version was installed with the VG30E Nissan V6, that was shared with the Fairlady ZX .